Snap connector for 9V Krona battery, terminal with contact wires, 9 V

A convenient and reliable solution for connecting 9V "Krona" batteries in your electronics projects! The ready-made connector with red (+) and black (-) wires eliminates the need to solder contacts yourself, saving your time while providing a safe and stable connection. Ideal for DIY, prototyping and device repair.

Product code	00176
Category	Power Connectors, Wires and Cables
In stock	10+ in stock

4 TL

Free shipping on orders over 1,000 TL
After ordering, the item is reserved for you for 24 hours

§ 01 — Specifications

Connector type	Socket (connector) for 9V "Krona" battery
Battery compatibility	6F22, 6LR61, 1604A, PP3, "Korund" and other 9V
Rated voltage	9 V
Wire length	15 cm (± 1 cm)
Wire colors Red	(anode, +), Black (cathode, -)
Contact material	Steel or brass with nickel/tin plating
Housing material	ABS plastic (impact-resistant, flame-retardant)
Wire insulation material	PVC (Polyvinyl chloride)
Wire cross-section	~0.22 mm² (usually stranded for flexibility)
Maximum current load	~1-2 A (depends on wire and contact quality)
Connection type	Crimped/soldered (wires soldered to the connector contacts)
Mounting method	Built into a housing, fixed with screws or glue

§ 02 — Description

Contacts for Krona-type batteries with 15 cm wires. A Krona-type battery is needed when you must get a 9 V current and the device dimensions do not allow installing two or more batteries at once or powering them from two sides. For comparison, the Krona case hides 6 AA-type cells. However, when using a Krona battery, you must provide its connection, since it requires a connector of a special size. A pair of wires comes out of the connection socket: red and black, each 15 cm long. They can be soldered to a board or inserted into terminals. Spade terminals can be attached to a screw clamp. A Krona holder can also be built into a plastic housing for a fixed position and more convenient connection. Key advantages: durable contacts.